THIS WEEKEND - Change your clocks,
change your batteries
Send a link to a friend
[March 12, 2016]
SPRINGFIELD
– The Illinois Office of the State Fire Marshal (OSFM) recommends
changing smoke alarm batteries when setting clocks forward one hour
this Sunday, March 13, 2016. Smoke alarm batteries should be changed
twice a year in order to ensure that they work properly to prevent
injuries and deaths in case of a fire.
|
“Changing smoke alarm batteries when we change our clocks is a
great way to get in the habit of making sure our smoke alarms work
in the case of an emergency,” said State Fire Marshal Matt Perez.
“Smoke alarms can alert residents to a fire happening in their homes
and offer an opportunity to escape to safety.”
More than 18,000 structure fires are reported on average each year
in Illinois. According to the National Fire Protection Association (NFPA),
in 2014 there were close to 1.3 million fires in the United States,
causing 3,275 deaths and over $11 billion in property damage. A 2015
report by the NFPA notes that three out of five home fire deaths
result from fires in properties where no working smoke alarms were
present.
Illinois law requires every household to have smoke alarms within 15
feet of every bedroom, and at least one on each floor of the home.
The Office of the State Fire Marshal provides the following
recommendations for installing and maintaining smoke alarms:
Installation
- NFPA strongly recommends either installing combination smoke
alarms, or both ionization and photoelectric alarms, in the
home. An ionization alarm is typically more responsive to a
flaming fire, such as a pan fire. A photoelectric alarm is
typically more responsive to a smoldering fire, as might occur
when a lit cigarette is dropped on a sofa. Combination smoke
alarms have both ionization and photoelectric capabilities.
- Make sure the smoke alarm you choose carries the label of a
recognized testing laboratory.
- Consider installing interconnected smoke alarms.
Interconnected smoke alarms offer enhanced protection; when one
sounds, they all do.
- A licensed electrician can install either hard-wired
multiple-station alarms or wireless alarms, which manufacturers
have more recently begun producing. An electrician can also
replace existing hard-wired smoke alarms with wirelessly
interconnected alarms
[to top of second column] |
Maintenance and Testing
- Test smoke alarms at least once a month using the test
button, and make sure everyone in your home knows their sound.
- If an alarm “chirps,” warning the battery is low, replace
the battery right away.
- Replace all smoke alarms, including alarms that use 10-year
batteries and hard-wired alarms, when they’re 10 years old or
sooner if they do not respond properly when tested.
- Change the batteries on smoke alarms at least twice a year.
Daylight Savings Time can serve as a reminder to “Change your
Clock, Change your Batteries.”
For more information on fire safety and prevention, please
visit OSFM’s website at sfm.illinois.gov.
[Office of the State Fire Marshal]
|