Trump faces pushback on tariffs but says he will not
back down
Send a link to a friend
[March 06, 2018]
By Susan Cornwell and Ayesha Rascoe
WASHINGTON (Reuters) - U.S. President
Donald Trump faced growing pressure on Monday from political and
diplomatic allies as well as U.S. companies urging him to pull back from
proposed steel and aluminum tariffs, although he said he would stick to
his guns.
Inside the White House, there still appeared to be confusion about the
timing and extent of the planned tariffs, which would hit allies like
Canada and Mexico hard.
Efforts by Trump and U.S. trade negotiators to link the NAFTA trade pact
talks to the duties received short shrift from Ottawa and Mexico City.
Leading Republicans turned up the pressure on Trump, with House of
Representatives Speaker Paul Ryan leading the charge. Ryan's home state
of Wisconsin would be hit by proposed European counter-measures on
Harley-Davidson Inc motorbikes.
Representative Kevin Brady, another top House Republican, called on
Trump not to hit America's closest allies.
Business leaders are pressing for a meeting with Trump to brief him on
the negative repercussions of the tariffs on companies that use steel
and aluminum, a source familiar with the matter said.
A meeting had not yet been set up, the source said. The White House had
no comment.
The planned tariffs have roiled world stock markets as investors worried
about the prospect of an escalating trade war that would derail global
economic growth. Stocks across the globe rose on Monday, however, after
four days in decline as investors saw the tariff threats as a U.S.
negotiating tactic and not a done deal and as pressure grew on Trump to
back off.
"We're not backing down," Trump said during a White House meeting with
Israeli Prime Minister Benjamin Netanyahu. "I don't think you're going
to have a trade war," he added, without elaborating.
Canadian Prime Minister Justin Trudeau called Trump on Monday to tell
him the tariffs would be an impediment to talks on updating NAFTA, a
Canadian government official said.
Canada is the single largest supplier of steel and aluminum to the
United States. In the call, Trudeau "forcefully defended" Canadian
workers and industries, said the official, describing the conversation
as constructive.
Earlier comments from Trump had stoked talk of a global trade war as he
described them as easy to win and issued a threat to German carmakers.
One of those, BMW, runs a plant in the United States that is the largest
single autos exporter in the country and has created thousands of jobs.
Most responses to Trump's proposed tariffs have been targeted. The
European Union said it would hit Harleys, bourbon and jeans, iconic
American products. It did not threaten to ramp up the issue.
China has been largely mum, urging caution, and both Canada and Mexico
have stressed the targeted nature of any response.
STRESSES INSIDE THE WHITE HOUSE?
Trump was expected to finalize the planned tariffs later in the week,
although some observers familiar with the process said it could occur
next week. The initial announcement by Trump last week came as a
surprise.
[to top of second column] |
A worker inspects wire
rod at TIM stainless steel wire factory in Huamantla, in the Mexican
state of Tlaxcala October 11, 2013. REUTERS/Tomas Bravo/File Photo
The United States, Mexico and Canada have been holding talks over changes to the
North American Free Trade Agreement, a pact that Trump has threatened to
abandon.
Six months of tense talks have produced little in the way of progress and a move
by Washington to link the steel and aluminum tariffs to progress on NAFTA was
rebuffed by Canada and Mexico.
U.S. Trade Representative Robert Lighthizer also attempted to drive a wedge
between Canada and Mexico when he suggested the United States would be willing
to hold bilateral, rather than trilateral talks. The two countries again stood
firm.
In Washington, aides scrambled to meet Trump’s demand for the paperwork to be
completed for a formal announcement. The exact timing was unclear as the tariff
documentation had to be drafted and go through a variety of reviews, a process
that takes days, an administration official said.
There was always a chance that Trump ”could amend his initial announcement” to
take account of the concerns expressed about it, said a source familiar with the
internal debate at the White House.
TRUMP'S TRADE TRAIL
Trump has frequently talked tough on trade, although his actions have not always
matched his words. On his first day in office in January 2017, he withdrew from
the 14-nation Trans Pacific Partnership agreement, a deal that was dead on
arrival in the U.S. Congress in any case.
He has frequently tweeted and said that he would pull out of NAFTA, which he has
called a jobs killer. But a year after taking office, the 1994 deal remains
intact.
Trump has approved a series of small-scale trade actions, of which the steel and
aluminum duties would be a part. Taken together with actions on washing machines
and solar panels, the proposed move accounts for just 4.1 percent of U.S.
imports. In terms of global trade, they are just 0.6 percent, investment bank
Morgan Stanley said in a report.
The head of the World Trade Organization warned of a real risk of triggering an
escalation of global trade barriers and a deep recession, even as financial
markets and many economists started to discount the risk of a global crisis.
"We must make every effort to avoid the fall of the first dominoes. There is
still time," WTO Director General Roberto Azevedo told the heads of WTO
delegations at a closed-door meeting in Geneva.
(Additional reporting by Susan Heavey, Steve Holland, Eric Walsh and Susan
Heavey in Washington, Adriana Barrera, Sharay Angulo, Lesley Wroughton and David
Ljunggren in Mexico City, Rodrigo Campos in New York and Tom Miles in Geneva;
Writing by Frances Kerry and David Chance; Editing by Andrea Ricci and Peter
Cooney)
[© 2018 Thomson Reuters. All rights
reserved.] Copyright 2018 Reuters. All rights reserved. This material may not be published,
broadcast, rewritten or redistributed.
Thompson Reuters is solely responsible for this content. |