Daylight Saving Time Ends; Time to
Test, Inspect and Replace Life Saving Smoke Alarms
If your alarm was manufactured before
October of 2013, it’s time to replace that alarm with a 10-year
sealed battery device.
Send a link to a friend
[November 03, 2023]
The
Office of the Illinois State Fire Marshal (OSFM) reminds residents
to test, inspect and replace any broken or expired smoke and CO
alarms while they change their clocks this upcoming weekend as
daylight saving time comes to an end. Smoke alarms only have a life
span of 10 years before they need to be replaced. If your alarm was
manufactured before October of 2013, it’s time to replace that alarm
with a 10-year sealed battery device.
“Daylight Saving Time serves as a bi-annual reminder for residents
to test, inspect and replace any broken or expired smoke and CO
alarms in their homes that could save their life,” said Illinois
State Fire Marshal James A. Rivera. “Materials used in modern home
construction burn hotter and faster reducing the escape times to
less than 3 minutes in most cases. Families need to review their
fire escape plans and hold drills to ensure everyone in the house
knows at least two ways out of every room and where to meet outside
of the home in the event of a fire.”
The National Fire Protection Association (NFPA)
reports that between 2014-2018, almost three out of every five home
fire deaths in the U.S. resulted from fires in homes with no smoke
alarms or non-working smoke alarms. The death rate per 1,000
reported home fires was more than twice as high in homes that did
not have any working smoke alarms compared to the rate in homes with
working smoke alarms. In fires in which the smoke alarms were
present but did not operate, two of every five of the smoke alarms
had missing or disconnected batteries. Dead batteries caused 26% of
the smoke alarm failures. Replacing alarms that have missing
batteries or are either expired or broken with new ten-year sealed
detectors will help reduce residential fire deaths across the state.
[to top of second column] |
Here are some tips to help your
family prepare or update their home fire escape plan:
Get everyone in your household together and make a home
escape plan. Walk through your home and look for two ways
out of every room.
Make sure escape routes are clear of debris and doors and
windows open easily. Windows with security bars or grills should
have an emergency release device.
Plan an outside meeting place where everyone will meet
once they have escaped. A good meeting place is something
permanent, like a tree, light pole, or mailbox a safe distance
in front of the home.
If there are infants, older adults, family
members with mobility limitations or children who do not wake to the
sound of the smoke alarm, make sure that someone is assigned to
assist them in the event of an emergency.
If the smoke alarm sounds, get outside and stay outside.
Respond quickly – get up and go, remember to know two ways out of
every room, get yourself outside quickly, and go to your outside
meeting place with your family.
Once you're out, stay out! Under no circumstances should you
ever go back into a burning building. If someone is missing, inform
the fire department dispatcher when you call. Firefighters have the
skills and equipment to perform rescues.
More tips on fire escape planning can be found by visiting:
https://www.nfpa.org/Public-Education/Staying-safe/Preparedness/Escape-planning.
[Illinois Office of Communication and
Information] |